Movable Drive Face - Sym RS-50 Service Manual

This chapter Contents
7. "V" TYPE BELT DRIVE SYSTEM/KICK-STARTER
Install the driven pulley that has installed the belt
Drive shaft
Drive face
Drive belt
onto drive shaft.
Clutch/driven pulley
Install the clutch with universal holder, and then
Clutch outer
tighten nut to specified torque value.
Torque value: 3.8kgf-m
Nut
Universal holder

Movable Drive Face

Removal
Universal holder
Remove left crankcase cover.
Hold generator flywheel with universal holder, and
then remove drive face nut.
Flywheel
Remove drive face.
Nut
Drive face
7-6