Front Cushion; Front Fork/Steering Column - Sym RS-50 Service Manual

Front cushion

Removal
Remove the front fender, front under spoiler, front
cover, and front wheel as well as front brake
components.
Remove the brake fluid hose clipper or cable
guide on the left cushion. (bolt x 1)
As for disc brake, remove the cable guide on the
right cushion. (bolt x 1)
Remove the top connection bolt of the right
cushion. (bolts x 4)
Remove the cushion from the front fork.
Installation
Install the cushions according to the reverse
procedure of removal.
Align the cushion top-edge with the top-end level
of the front fork when installing the front cushion
onto the front fork. Then, tighten the nut.
Torque value: 2.4~3.0kgf-m

Front fork/steering column

Removal
Firstly, remove the handle, front wheel, front brake
set, and front cushions.
Remove the steering lock nut.
Remove the top cone race, and then remove the
steering column.
Caution
Place the steering column bearing balls into a
parts container to avoid to missing or shortage.
This Chapter Contents
13. Steering/Front Wheel/Front Shock Absorber
Front cushion
Steering lock nut
Brake fluid hose clipper
Bolts
Steering top cone race
13-7