Movable Drive Face - Sym Fiddle 50 Service Manual

This chapter Contents
7. "V" TYPE BELT DRIVE SYSTEM/KICK-STARTER
Install the driven pulley that has installed the belt
Drive shaft
Drive face
Drive belt
onto drive shaft.
Clutch/driven pulley
Install the clutch with universal holder, and then
Clutch outer
tighten nut to specified torque value.
Torque value: 3.8kgf-m
Nut
Universal holder

Movable Drive Face

Universal holder
Removal
Remove left crankcase cover.
Hold generator flywheel with universal holder,
and then remove drive face nut.
Flywheel
Nut
Remove drive face.
Drive face
7-6