Belt Clip & Optional Headset - AT&T E1215B User Manual

91-000272-010-000_E2715B&E1215B_R0.qxd
Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
2/23/2005 5:38 PM
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
9
Page 9