Operations - Onkyo LS3200 Instruction Manual

Operations

Operations
zON/STANDBY
ON/STANDBY LED
Turning On the controller
1
Press ÍON/STANDBY on the top
panel.
or
Press Í on the remote controller.
The controller comes on, and the
ON/STANDBY LED lights white.
Press ÍON/STANDBY or Í again to set
the controller to standby mode.
Tip
• For details on power management settings, see
"Setting the Auto Power On" ( page 18).
Note
• To prevent any loud surprises when you turn on the
controller, always turn down the volume before you
turn it off.
/ INPUT
VOLUME +/ -
SOUND MODE
SUBWOOFER +/ -
-
Volume /+
/TV input
Bluetooth LED
Enjoying the sound
Operating with the remote controller
1
Turn on the connected TV.
2
Press INPUT to select the TV
selector.
• "Listening to an audio from Bluetooth
device" ( page 20)
3
To adjust the volume, use VOLUME +/
4
Select a sound mode and enjoy!
• "Using the Sound Modes" ( page 19)
Operating on the controller
1
Turn on the connected TV.
2
Press the /TV input button repeatedly
until the Bluetooth LED goes off to
select the TV selector.
3
To adjust the volume, use the
Volume /+ buttons.
-
Tip
• Adjust the volume by 1 step in the 0 to 35 range.
• The ON/STANDBY LED flashes by receiving the
signal from the remote controller.
• When the Auto Power On function is set to on, the
controller is automatically turned on by receiving
the audio input from the TV and the TV selector is
selected.
- .
En
17