Onkyo LS3200 Instruction Manual page 16

Connecting the Power cord
(LAP-302)
1
Connect the supplied AC adapter and
the power cord.
2
3
To AC wall outlet
2
Insert the plug of the AC adapter into
DC IN.
3
Plug the AC adapter into an AC wall
outlet.
(SKW-B50)
1
Connect the supplied power cord for
subwoofer to AC INLET.
1
2
To AC wall outlet
Note
• The shape of the AC INLET differs depending
on the country.
2
Plug the power cord into an AC wall
outlet.
En
16
Note
• Before connecting the power cord, connect all of
• Turning on the unit may cause a momentary power
• Do not use the power cord other than the one
• Never disconnect the power cord from the unit
1
your speakers and TV.
surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the unit into a different branch circuit.
supplied with the unit. The supplied power cord is
designed exclusively for use with the unit and
should not be used with any other equipment.
while the other end is still plugged into a wall outlet.
Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first,
and then the unit.