Jumper Block; Location Of The Bios Setup Jumper Block - Intel YA810E Technical Product Specification

Intel Desktop Board YA810E Technical Product Specification

2.9 Jumper Block

CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, damage to the YA810E
board could occur.
Figure 9 shows the location of the BIOS Setup jumper block. This 3-pin jumper block determines
the BIOS Setup program's mode. Table 39 describes the jumper settings for the three modes:
normal, configure, and recovery.
1
J4A1
58
3
Figure 9. Location of the BIOS Setup Jumper Block
OM08949