Cd-In Connector: Jcd1; Chassis Intrusion Switch Connector: Jci1; Front Usb Connectors: Jusb1 & Jusb2 - MSI MS-6728 Manual

MS-6728 ATX Mainboard

CD-In Connector: JCD1

The connector is for CD-ROM audio connector.

Chassis Intrusion Switch Connector: JCI1

This connector is connected to a 2-pin chassis switch. If the chassis is opened,
the switch will be short. The system will record this status and show a warning
message on the screen. To clear the warning, you must enter the BIOS utility and
clear the record.
Front USB Connectors: JUSB1 & JUSB2
The mainboard provides two USB 2.0 pin headers JUSB1 & JUSB2 (Optional)
that are compliant with Intel
increases data transfer rate up to a maximum throughput of 480Mbps, which is 40
times faster than USB 1.1, and is ideal for connecting high-speed USB interface
peripherals such as USB HDD, digital cameras, MP3 players, printers, modems
and the like.
2
1
JUSB2, JUSB1
(USB 2.0/Intel spec)
MSI Reminds You...
Note that the pins of VCC and GND must be connected correctly or
it may cause some damage.
2-24
JCD1
R GND L
2
GND
1
CINTRU
JCI1
®
I/O Connectivity Design Guide. USB 2.0 technology
JUSB1 & JUSB2 Pin Definition
PIN SIGNAL
10
9
1 VCC
3 USB0-
5 USB0+
7 GND
9 Key (no pin)
PIN SIGNAL
2 VCC
4 USB1-
6 USB1+
8 GND
10 USBOC