Left-Wing: Current System Status; Right-Wing: Pc Hardware Status During Real Time Operation - MSI MS-6728 Manual

Introduction to DigiCell

Left-wing: Current system status

In the left sub-menu, you can configure the settings of FSB, Vcore, Memory Voltage
and AGP Voltage by clicking the radio button next to each item and make it available
(the radio button will be lighted as yellow when selected), use the "+" and "-" buttons
to adjust, then click "OK" to apply the changes. Then you can click "Save" to save
the values you just configured.
Also you may click "Auto" to start testing the maximum CPU overclocking value. The
CPU FSB will automatically increase the testing value until the PC reboots. Or you may
click "Default" to restore the default values.

Right-wing: PC hardware status during real time operation

In the right sub-menu, here you can configure the PC hardware status such as CPU
& system temperatures and fan speeds. You may use the scroll bars to adjust each
item, then click "OK" to apply the changes. The values you set for the temperatures
are the maximum thresholds for the system for warnings, and the value for fan
speeds are the minimum thresholds.
4-15