Setting Order - Aiphone JKW-IP Operation Manual

INTRODUCTION

1-3 Setting Order

MEMO
Be sure to check the system configuration before making settings, and then connect the units correctly.
•
You need to contact your provider (ISP) to connect to the Internet.
•
Before making settings, be sure to obtain necessary information such as the Static IP Address, Email
•
Addresses, and any other necessary information.
The IP address of this device is fixed at 192.168.0.30 (default setting). If the same address is already being
*
used for another device, please change the IP address for the other device.
Use the following steps to set up this product.
If you do not, this product cannot be used.
S 1
tep
S 2
tep
S 3
tep
S 4
tep
S 5
tep
S 6
tep
S 7
tep
Starting up the IP Video Intercom Adaptor
Installing the PC Application
Registering the IP Video Intercom Adaptor
Administrator Settings
・
Administrator Registration
・
User Registration
・
Email Setting (Adaptor)
・
Sensor input / Option output Settings
・
Network Settings
・
Log Downloading/Firmware Update
Registering IP Video Intercom Adaptor Users
User Settings
・
Downloading Encryption Key
・
Email Setting
Setting the PC Application
・
Volume Settings
・
Preference Settings
P.9
P.9
P.15
P.18
P.30
P.32
P.35
8
Setting Authority
User
Administrator
○ ━
Setting Authority
User
Administrator
○ ○
Setting Authority
User
Administrator
○ ━
Setting Authority
User
Administrator
○ ━
Setting Authority
User
Administrator
━ ○
Setting Authority
User
Administrator
○ ○
Setting Authority
User
Administrator
○ ○