Pc Application Basic Operations; Video Intercom Functions; Answering A Call From The Door Station - Aiphone JKW-IP Operation Manual

4

PC Application Basic Operations

4-1 Video Intercom Functions

By using the PC Application, you can operate the following
video intercom functions for the video intercom system and
synchronized devices (electronic door lock and other connected
devices, etc.) connected to the IP Video Intercom Adaptor.
Controllable Video Intercom Functions

Answering a call from the door station

Door release
Zoom/Wide, Pan & Tilt
Adjust image
Room-to-room communication (Communication with a
master monitor station)
Entrance monitoring
Sensor Detection from Connected Equipment
Option Output from IP Video Intercom Adaptor
Balloon Notification
4-1-1 Answering a call from the door station
1.
When there is a call from the door station, a call tone
sounds and the entranceway image is displayed on the
PC Application screen.
2
(Red) 1 CALL DOOR (Numbers indicate the
Status:
order of the calls)
<Adaptor Name> CALLING FROM DOOR <Door
MESSAGE:
station No.>
・
The cor responding "Adaptor" (the IP Video Intercom
Adaptor connected to the calling door station) enters
Selected status ( j ).
・
In this status, you can switch the image display to Zoom
screen/Wide screen by clicking the [ZOOM / WIDE] ( k ). For
more information, see "Zoom/Wide, Pan & Tilt".
・
The screen is switched when "Zoom/Wide" or "Pan & Tilt"
is operated from a master monitor station or another PC
Application.
・
When the call timer's set time (about 45 seconds) has
elapsed, the PC Application returns to standby status. The
PC Application also returns to standby status when the
master monitor station answers a call from the door station.
・
The communication time depends on the master monitor
station settings.
・
The Instant voice call function is not available in the PC
Application.
・
If the check mark is removed from Call Tone in "Event
Action Settings" , the call tone will not sound.
P.38
Reference
P.41
P.42
P.43
P.44
P.44
P.46
P.47
P.47
P.47
1
P.43
The screen for image acquisition is displayed until the
image is displayed on the PC Application screen.
When the system is composed of multiple IP Video Intercom
Adaptors, master monitor stations, door stations, and PCs.
All PC Applications are called when there is a call from any
of the door stations in the system.
MEMO
When a master monitor station is communicating with the PC
•
Application, and a call comes in from the door station of the master
monitor station, only the PC Application currently active is called.
• When calling multiple PC Applications, the displayed image
may be slowed down.
• When calling multiple PC Applications, the image displayed
on the PC Application may be delayed, depending on the
number of connections.
When the following processes occur one after another,
"1 CALL DOOR" and "COMMUNICATION" are displayed
alternately in the "Status" display section of the Expanded
Window ( l ).
• When there is a call from the door station of the master
monitor station while talking with the master monitor
station.
・
When you click "OFF", the image from the calling door
station is displayed, and you can click [TALK] to start the
communication.
MEMO
• Even if the master monitor station does not have a recording
function, you can record using the PC Application.
41
PC Application Basic Operations
3