Message Alert Tone - AT&T CL84350 User Manual

Telephone settings
Answering system settings (handset only)

Message alert tone

When the message alert tone is set to ON, and there is at least one new
message, the telephone base beeps every 10 seconds.
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then
/SELECT.
press
MENU
3. Press qCID or pDIR to scroll to >Ans sys setup, then
/SELECT.
press
MENU
4. Press qCID or pDIR to scroll to >Msg alert tone, then
press /SELECT.
MENU
5. Press qCID or pDIR to choose On or Off.
/SELECT to confirm your setting and you hear a
6. Press
MENU
confirmation tone. Press
NOTES:
1. The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2. To temporarily turn off the message alert tone, see page 61.
OFF/
to cancel.
CLEAR
23
Unless you change it,
Play messages
to
SELECT
Answering sys
>
Ans sys setup
>
-End of list-
Msg alert tone
>
-End of list-
MSG ALERT TONE
>On