Charge The Battery - Kensington keyfolio pro 2 Quick Start Manual

6 The Keyboard now appears on your tablet screen. Tap Bluetooth Wireless Keyboard.
7 Your tablet screen displays a passkey. Enter the passkey on the Keyboard, and press
Enter.
8 Your tablet screen shows the Keyboard as Connected. On the Keyboard, the Bluetooth
Status Indicator Light turns off.
9 You can now use your Keyboard to type in any app.
Note the following about the Bluetooth connection between the keyboard and your tablet:
• If the devices are connected and you turn the Keyboard off, the devices are still
connected when you turn the Keyboard back on. You can simply begin typing to
use the Keyboard.
• Likewise, if the devices are connected and you turn your tablet off, the devices are still
connected when you turn your tablet back on. You can simply begin typing to use the
Keyboard.
• If the devices are connected and you turn Bluetooth off on your tablet, when you turn
Bluetooth back on, you need to connect the devices again by following the steps above.
NOTE: If the Keyboard sits idle for 15 minutes when it is connected to your tablet, the
Keyboard goes into a dormant state, and the Power Indicator Light turns off. To wake up
the Keyboard, press and hold the Connect Button for 3 seconds.

Charge the Battery

When the Charging Indicator Light is blinking, you need to charge the Keyboard battery.
1 Insert the small end of the Charging Cable into the micro USB Charging Connector on
the Keyboard.
2 Insert the other end of the Charging Cable into your a USB port on your computer.
The Charging Indicator Light glows red.
NOTE: You can also insert the other end of the Charging Cable into a USB charger
adapter, and then plug the adapter into a working outlet.
3 When the Keyboard is fully charged, the Charging Indicator Light turns off.
4