Table of Contents
Advertisement
When selecting the TONE
OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.)
�
ON : To adjust the tone for your taste. ("DIR" indicator goes off.)
NOTE : When the 6CH DIRECT INPUT is selected as an input source, the TONE cannot be set to ON.
�When the TONE is set to ON to adjust the tone (bass and treble)
① Press the OK button to enter the tone adjustment.
② Press the ▲/▼ buttons to select the desired tone.
③ Press the ◀/▶ buttons to adjust the selected tone as
desired.
• The tone level can be adjusted within the range of -12 ~
+12 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps ②
and ③.
35
Hide quick links:
Advertisement
Table of Contents
