Other Functions - Harman Kardon AVR 134 Owner's Manual

OTHER FUNCTIONS

Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
• To set the receiver to automatically turn off after the specified period of time.
Adjusting the brightness of the fluorescent display
Displaying the operation status
During playback,
• Each time this button is pressed, the sleep time changes
as follows:
→ 10 → 20 → 30 → --- → 90 → OFF
Unit : minutes
• While operating the sleep timer, "
• When the sleep time is selected, the fluorescent display
is dimly lit.
• Each time this button is pressed, the brightness of
the fluorescent display changes as follows:
→ ON → dimmer → OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
• Each time this button is pressed, the display mode
changes as follows:
Surround
Volume
→ →
mode
• When the 6CH DIRECT INPUT is selected as an input
source, the surround mode is not displayed.
• When the USB IN is selected as an input source, for
details on the file information, see "Displaying file
information during playback" on page 28.
31
" lights up.
Input
→
source