Harman Kardon AVR 134 Owner's Manual page 23

Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you
want.
1.
After performing the steps 1 ~ 4 in "Adjusting the
current channel level" procedure on page 22, press
the OK button.
• Then "1" of "REF 1" indication flickers for several seconds.
Recalling the memorized channel levels
1.
Press the CHANNEL SELECT button.
• "CAL " (or "REF 1", etc.) is displayed for several seconds.
• If the channel level mode display disappears, press this
button again.
2.
Select the desired one of REF 1 and REF 2.
• If the preset memory disappears, perform the above step
1 again.
3.
Confirm your selection.
• The adjusted channel levels have now been memorized
into the selected memory.
2.
Select the desired one of REF 1 and REF 2.
• The channel levels memorized into the selected preset
memory are recalled.
23