Adjustment
12
Adjusting the edge trimmer -725/04
.05
12
Position of the knife holder on model 1571
.05.01
● Turn the adjusting wheel 1 to its highest position and engage edge trimmer.
● Adjust knife holder 2 (screw 3) according to the requirements.
12 - 31
Requirements
When the thread trimmer is engaged and the adjusting wheel has been turned to its
highest position
1. the knife holder 2 must be parallel to the post and
2. the top edge of the needle plate must be in the centre of the angular knife opening.
2
1
Fig. 12 - 27
3