Adjustment
11
Adjusting the edge trimmer -725/04
.05
11
Position of the knife holder on model 571
.05.01
11 - 36
Requirements
When the thread trimmer is engaged and the adjusting wheel has been turned to its
highest position
1. the knife holder 2 must be parallel to the post and
2. the top edge of the needle plate must be in the centre of the angular knife opening.
2
1
Fig. 11 - 32
Turn the adjusting wheel 1 to its highest position and engage edge trimmer.
Adjust knife holder 2 (screw 3) according to the requirements.
3