Pfaff 1571 Instruction Manual page 25

Start backtacks on/off
● This key is used to switch the start backtacks on or off.
When the LED is on, the start backtacks are sewn.
End backtacks on/off
● This key is used to switch the end backtacks on or off.
When the LED is on, the end backtacks are sewn.
Backtack suppression
● Press the key once: start backtacks are not sewn.
● Press the key twice: start and end backtacks are not sewn.
Program key
● When this key is activated (LED on) a "program" (stitch length value) can be entered or
selected with the knee switch.
Parameter input
● After this function has been activated (LED is on) the operator is in the parameter input
function. When the function is switched off, the operator returns to the sewing mode.
F1 – F5 keys
to
● In the sewing mode these keys do not have any function.
● When entering the code number these keys correspond to the numbers 1 – 5.
Needle position
● The position of the needle can be selected with this key.
Function activated (LED on): When sewing stops, the needle is positioned at t.d.c.
Function deactivated (LED off): When sewing stops, the needle is positioned at b.d.c.
● When entering the code number this key corresponds to number 6.
Position of the presser foot when sewing stops
● With this key it is possible to select the position of the presser foot when sewing stops.
Function activated (LED on): When sewing stops, the presser foot is raised
Function deactivated (LED off): When sewing stops, the presser foot is lowered
● When entering the code number this key corresponds to number 7.
Position of the presser foot after thread trimming
● With this key it is possible to select the position of the presser foot after thread trimming
Function activated (LED on): After thread trimming, the presser foot is raised
Function deactivated (LED off): After thread trimming, the presser foot is lowered
● When entering the code number this key corresponds to number 8.
Thread trimmer on/off
● This key is used to switch the thread trimmer on or off.
When the LED is on, the thread can be trimmed with the use of the pedal.
● When entering the code number this key corresponds to number 9.
● In sewing mode this key has no function.
● When entering the code number this key corresponds to number 0.
Controls
7 - 9