Toshiba B-SX4 Series Key Operations Manual page 57

Item
RFID MODULE
RFID TAG TYPE
RFID ERR CHECK
RFID RETRY
RFID RD CYCLE
RFID WT CYCLE
RFID ADJ RETRY
RFID POWER LEVEL RFID wireless power level setting
RFID THRESHOLD
RFID RF CHANNEL
XML SPEC
(Supported only
by V4.4A)
NOTE: For the B-SX4, the head density is 8 dots/mm. If the value is set to "x.2 mm" or "x.3
mm", the operation to be performed is the same for both. Therefore, "x.3 mm" is
printed on the maintenance counter printout, even if "x.2 mm" is set. Similarly, if "x.7
mm" is set, "x.8 mm" is printed on the maintenance counter printout.
Contents
RFID module type selection
RFID tag type selection
RFID error tag detection
Max. number of RFID issue retries 0 to 255
Max. number of RFID read retries
RFID read retry time-out
Max. number of RFID write retries
RFID write retry time-out
RFID adjustment for retry
RFID AGC threshold setting
RFID channel setting
XML function setting
- 54 -
Remarks
NONE: No RFID kit is installed.
U1: B-9704-RFID-U1-EU/US
H1: B-9704-RFID-H1-QM
H2: B-SX704-RFID-H2
U2: B-SX704-RFID-U2
I-Code: 11
Tag-it: 12
C220: 13
ISO15693: 14
C210: 15
C240: 16
C320: 17
EPC Class0: 21
EPC Class1: 22
ISO18000-6B: 23
EPC C1 Gen2: 24
ON: Detection is enabled.
OFF: Detection is disabled.
0 to 255
0 to 9.9 sec.
0 to 255
0 to 9.9 sec.
-99 mm to +99 mm
0 to 255 (for the B-9704-RFID-U1-
US/EU)
18 to 26 (for the B-SX704-RFID-
U2)
0 to 15
2CH to 8CH
AUTO
STD: Standard specification
ORACLE: Specification for Oracle