Toshiba B-SX4 Series Key Operations Manual page 35

LCD Messages of
No. Upper line
(English)
25 RFID WRITE ERROR
26 RFID ERROR
27 INPUT PASSWORD
28 PASSWORD INVALID
Please Power Off
(This is spread over the
upper and lower lines)
NOTE 1: When a command error is found in the command sent, 16 bytes of the command code of the
error command are displayed on the upper line of the LCD. (However, [LF] and [NUL] are
not displayed.)
[Example 1]
Command error
[Example 2]
Command error
[Example 3]
Command error
NOTE 2: When the command error is displayed, "? (3FH)" is displayed for codes other than 20H to 7FH
and A0H to DFH.
LED Indication
POWER ON LINE ERROR
[ESC] PC001; 0A00, 0300, 2, 2, A, 00, B [LF] [NUL]
LCD display
PC001;0A00,0300,
B-SX4T V1.0A
[ESC] T20 G30 [LF] [NUL]
LCD display
T20G30
B-SX4T V1.0A
[ESC] XR; 0200, 0300, 0450, 1200, 1 [LF] [NUL]
LCD display
XR;0200,0300,045
B-SX4T V1.0A
Printer Status
The printer does not succeed
in writing data onto the RFID
tag after having retried for
the specified times.
The printer cannot
communicate with the RFID
module.
The printer is waiting for a
password to be entered.
Password entered was not
correct consecutively for
three times.
- 32 -
Restoration Acceptance
by the of Status
[RESTART] Request
key
and
Reset
Yes/No Command
Yes/No
Yes Yes
Yes Yes
No No
No No