Making Ftp Connections - Sony PDW-850 Operation Manual

U07 POWER SAVE
ETHERNET/USB
REC AUDIO OUT
TEST OUT SAVE
Wi-Fi
4
Move b to ETHERNET/USB then press
the MENU knob.
5
Turn the MENU knob to select
"ENABL", then press the MENU knob.

Making FTP connections

FTP connections between this unit and a remote
computer can be made with either of the
following.
• The command prompt
• FTP client software
This section explains how to use the command
prompt. For more information about using FTP
client software, refer to the documentation of the
FTP client software on your system.
To log in
1
Load a disc into this unit and put the
unit into the following state.
Recording, playback, serch, and other disc
operations: Stopped
THUMBNAIL indicator: Off
Disc access by clip deletion, disc
formatting, or other operation:
Stopped
Picture Cache function and Interval Rec
function: Off
Recording of video from external devices:
Disabled
Connections between this unit and a
computer by the Live Logging
function: Disconnected
Setting of LIVE LOGGING on the REC
FUNCTION page of the
OPERATION menu: Values other than
VIEW (OFF or LIVE)
MENU ON/OFF switch: OFF
Unsaved current clip list: Save or clear
224
FTP File Operations
TOP
: DSABL
: EE
: ON
: DSABL
Note
Login is not possible unless the unit is in the state
described above.
2
Start the command prompt.
3
Enter "ftp <SP> <IP address>", and
press the Enter key. (<SP> refers to a
space.)
For example, if the IP address of this unit is
set to 192.168.001.010, enter "ftp
192.168.1.10".
Refer to the Windows help for more information
about the FTP command.
If the connection succeeds, you are prompted
to enter a user name.
4
Enter the user name "admin" and press
the Enter key.
When the user name is verified, your are
prompted to enter a password.
5
Enter the password and press the Enter
key.
The password is set to the model name
("pdw-850") when the unit is shipped from
the factory.
The login is complete when the password is
verified.
See "Command list" (page 225) for the protocol
supported by this unit.
If the connection times out
This unit terminates FTP connections if no
command is received within 90 seconds of
the last command. If this occurs, log out (see
the next section) and repeat steps 2 to 4.
Note
If you power this unit off during an FTP connection,
the data transferred thus far is discarded.
To log out
To log out after finishing file operations, enter
"QUIT" at the command prompt and press the
Enter key.