Sony PDW-850 Operation Manual page 96

of a clip on a disc to a USB flash drive", and copy the
proxy data that could not be recorded.
• It is not possible to record proxy data to a USB flash
drive only.
To stop recording
Recording to a USB flash drive stops whenever
recording to the disc stops.
To stop recording to the USB flash drive only, set
MEMORY REC on the MEMORY REC page of
the OPERATION menu to "DSABL".
To copy the proxy data of a clip on a disc
to a USB flash drive
Proceed as follows to select an already recorded
clip on a disc and copy its proxy data to a USB
flash drive.
Note
The following functions stop during execution of a copy.
• Playback cue up
• Picture Cache recording
1
Search for the video of the clip (being
played or stopped) that you want to
copy.
2
Select COPY CURRENT CLP in the
MEMORY REC page of the
OPERATION menu, and then press the
MENU knob.
The message "EXECUTE OK?" appears.
3
Select "YES", and then press the
MENU knob.
During the execution of the copy, the
message "MEMORY ACCESS **%"
appears in the viewfinder and on the LCD
monitor, where "**" is replaced with a
number (0 to 99) that indicates the
percentage completed. When processing
finishes, the message "COMPLETE!"
appears.
The proxy data of the current clip (the
currently stopped clip, or the one that being
played) is copied to the USB flash drive.
96
Advanced Operations for Shooting
To copy the proxy data of all clips on a
disc to a USB flash drive
Proceed as follows to copy the proxy data of all
clips on a disc to a USB flash drive.
Note
The following functions stop during execution of a copy.
• Playback cue up
• Picture Cache recording
1
Select COPY ALL CLIPS in the
MEMORY REC page of the
OPERATION menu, and then press the
MENU knob.
The message "EXECUTE OK?" appears.
2
Select "YES", and then press the
MENU knob.
During the execution of the copy, the
message "MEMORY ACCESS **%"
appears in the viewfinder and on the LCD
monitor, where "**" is replaced with a
number (0 to 99) that indicates the
percentage completed. When processing
finishes, the message "COMPLETE!"
appears.
The proxy data of all clips on the disc is
copied to the USB flash drive.
Note
The message "M. Shortage" appears when the mount of
data to be copied exceed the free capacity of the USB
flash drive. The copy is not executed. Exchange the USB
flash drive for one with enough free capacity.
To cancel a copy to a USB flash drive
1
Select ABORT COPY in the MEMORY
REC page of the OPERATION menu,
and then press the MENU knob.
The message "EXECUTE OK?" appears.
2
Select "YES", and then press the
MENU knob.
The message "ABORTING" appears in the
viewfinder and on the LCD monitor while
the unit is aborting the copy operation. The
message "ABORT" appears when the abort
processing is completed.