SATO M8400RVe Operation Manual page 15

Operation Manual
LED, illuminated when the power is on.
POWER
LED, illuminated when label supply is out.
LABEL
LED, illuminated when ribbon motion sensor does not detect
RIBBON
any ribbon motion (ribbon out), or the LED blinks when ribbon
is near end.
LED, illuminated when there is a system fault such as an open
ERROR
print head.
LED, illuminated when printer is ready to receive data. Turn
ON LINE
ON/OFF by toggling the LINE key.
M8400RVe
1. Overview and Specification
DSW 2 & 3:
operational parameters of printer. Refer
to Section 2 for settings.
LED'S: - STATUS INDICATORS
DIP Switches used to set
9