Proof
See
Load Algorithm Chart
The proo¿ ng feature automatically provides an appropriate temperature for the proo¿ ng process, and
therefore does not have a temperature adjustment.
1. Press the COOKING OPTIONS pad.
2. Turn the dial to select Proof, then press the dial to enter.
3. Select START or press the START/PAUSE pad to start. The oven starts proo¿ ng immediately and shows
the amount of proo¿ ng time to complete.
•
Check bread products early to avoid over-proo¿ ng.
•
To avoid lowering the oven temperature and lengthening proo¿ ng time, do not open the oven door
unnecessarily.
NOTES:
•
Do not use the proo¿ ng mode for warming food or keeping food hot. The proo¿ ng oven temperature is
not hot enough to hold foods at safe temperatures. Use the Warm feature to keep food warm.
•
Proo¿ ng will not operate if the oven is too hot. Allow the oven to cool before proo¿ ng.
Idle
When the microwave is in the idle or clock mode, all heaters are off, the damper is open, and the clock is
displayed. It is normal for the time of day to change positions on the display. This is done to avoid pixel burn
in. The fans are normally off, but may be on if the oven has recently ¿ nished a cycle. (See
for load operation in Proof.
– 13 –
.)
Cool Down