INC
VMA10003-R.3727.A
Caution:
Even if the SD card that includes "Enable PTPAP" is not inserted, pressing "Tele", "OK", and
"POWER" buttons simultaneously will initiate the adjustment program. So follow the below procedure.
Procedure
Copy "Enable PTPAP" into SD card, and insert it into the camera.
Connect PC and the camera via USB, and turn the camera ON.
① Start "L15_EEPROMTOOL".
② Click "Read From Camera".
③ Change the value of "Disable Test" from "0000" to "0001".
④ Click "Write To Camera".
⑤ Turn the camera OFF.
⑥ Detach the camera from the PC, and take out the SD card from the camera.
⑦ Confirm that the adjustment program does not start up by pressing simultaneously "Tele", "OK", and
"Power" buttons.
Caution:
In case of starting the program again for adjustments, change the value "Disable Test" from "0001"
to "0000". Otherwise, the program will not start up of this model, even if the SD card that includes
"Enable PTPAP" is inserted in the camera.
Additional Page
- A39-1 ・L15 -
January.15.2008