Table of Contents
Advertisement
13. FOCUS adjustment
"Zoom Stop" values of 4 steps and "Best Stop" values at infinity are written in "Flash Rom".
Device
・AC adapter (EH-65A) or fresh battery, collimator
[Preparation]
・ Turn on the collimator (J63090).
・ Adjust the position so that the center of the chart in the collimator comes to the center of the screen.
Procedure
・ Turn camera OFF. Then, press "power" button for a a few seconds, and
start the program.
・ Press "Playback" button to switch the screen.
・ Press "Select" button, and choose "FOCUS (Infinity)".
・ Press "Playback" button.
・ Press the left or right portion of "Select"
button, and change the value of "000001" to
"000000".
・ Press "OK" button twice.
・ Select and press "OK" button.
・ FOCUS adjustment starts.
・ The result appears in the lower right portion of the screen.
・ Turn camera OFF.
Additional page
Change to "000000"
only for "Disable".
- A30 ･Ｌ１５ -
INC
VMA10003-R.3727.A
October.16.2007
Advertisement
Table of Contents
