Table of Contents
Advertisement
10. Setting of the two-dimensional barcode reader (Manual input)
・Open "Device Manager" and check the setting of port.
"Device Manager" and check the setting of port.
Device Manager" and check the setting of port.
" and check the setting of port.
Click the right button of the mouse for "My Computer". Then, select the items in the following order�� [Properties]
→ [Hardware] → [Device Manager].
Note��The setting of port is changed according to the environment of the PC.
Example: Port is set to "COM4"
・ Start up "QR Reader".
Additional page
and check the setting of port.
"My Computer". Then, select the items in the following order�� [Properties]
My Computer". Then, select the items in the following order�� [Properties]
". Then, select the items in the following order�� [Properties]
. Then, select the items in the following order�� [Properties]
The COM number is changed
according to the personal
computer environment.
- A24 ･Ｌ１５ -
INC
VMA10003-R.3727.A
October.16.2007
Advertisement
Table of Contents
