Table of Contents
Advertisement
5. Firmware update (Adjustment firmware Ver.1.0b for services depts.)
The initial image data and the initial firmware are already written in RP parts.
Device
・AC adapter EH-65A
・Updating SD-card×1
[Create the SD card that is for updating the firmware]
1) Format the SD card on PC.
2) Create a folder named "firmware" in the root directory of the SD card.
3) Copy "firmware.bin" into the created folder.
Procedure
・ Turn camera OFF, and connect the AC adapter.
・ Insert the firmware-updating SD card into the camera.
1. Turn camera ON.
2. Press "MENU" button and set the shooting menu to SETUP.
3. Highlight "Firmware version".
4. The screen for updating is displayed. Select "Yes".
Caution: Do NOT turn OFF camera during updating.
(The language shown when the main PCB is
replaced is ENGLISH.)
5. A message indicating the completion is displayed.
6. Turn camera OFF, and remove the SD card.
Additional page
- A16 ･Ｌ１５ -
INC
VMA10003-R.3727.A
Adjustment firmware for
services depts Ver.1.0b
October.16.2007
Advertisement
Table of Contents
