Table of Contents
Advertisement
14. WB/AGC adjustment
WB ： Daylight R/B gain (calibrated value) is written in "Flash Rom".
AGC �� ISO gain (calibrated value) is written in "Flash Rom".
Device
・AC adapter (EH-65A) or fresh battery, ND filter (1.0), Color viewer, Luminance meter (BM-3000), Color
meter
Sometimes the adjustment result of WB/AGC becomes "NG" due to variation of BM-3000. Therefore, by using
the inspection report which is an accessory of BM-3000, set the luminance as below to keep the same luminance
without such variation,
The inspection report is in Japanese only. Refer to only data at overseas service facilities.
Procedure
① Find the corresponding value by crossing K=1.3 and EV10 in the accessory inspection report, and
calculate by putting the corresponding value into the below formula.
② Attach the ND filter (1.0) to the illuminating surface of the color viewer, and set the luminance of the
color viewer to the calculated result.
Additional page
1.0), Color viewer, Luminance meter (BM-3000), Color
, Color viewer, Luminance meter (BM-3000), Color
e.g.
Coefficient
168.38cd/ ㎡
25.99×
32
Coefficient
The calculated result corresponds to " EV9.7 " of
the inspection report.
- A31 ･Ｌ１５ -
INC
VMA10003-R.3727.A
Coolpix L15
Set the luminance to
this value.
136.8cd/ ㎡
＝
October.16.2007
Advertisement
Table of Contents
