Mitsubishi Electric MR-J3-T Quick Start Manual page 40

Additional Connections
Connections for the CC-Link network
(e.g. QJ61BT11N)
Fig. 5-2:
NOTE You must install a terminating resistor on terminals DB and DB on the physical first and last
stations in the CC-Link network. The required ohmage of the resistor depends on the cable
length, please check the version V1.10 specifications for details.
5 - 32
CC-Link
Master module
Connections between the servo amplifier and the CC-Link master module
Positioning via a CC-Link Network
MR-J3-T
MITSUBISHI ELECTRIC