Mitsubishi Electric MR-J3-T Quick Start Manual page 37

Positioning with Digital Inputs
MR Configurator can monitor all the inputs and outputs of the MR-J3-T, including those on the
MR-J3-D01 I/O extension.
Procedure:
Connect the PC/notebook to the USB port (CN5) of the servo amplifier using cable
MR-J3USBCBL3M.
Start MR Configurator and make the following selections:
– Select the MR-J3-T series amplifier.
– Select the MR-J3-D01 expansion card ("option unit").
Fig. 4-20: Settings in MR Configurator for checking the MR-J3-T with the MR-J3-D01
After this you can monitor the signals of the expansion card with the option Option unit I/F display
in the Monitor menu.
Fig. 4-21: Selection of the "Option unit I/F display" terminal monitor option
MR-J3-T
expansion card
Functional Test of Digital Input Positioning
4 - 29