Assembly - Bissell PROHEAT 2X LIFT-OFF 30K7 Series User Manual

Assembly

WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
Your deep cleaner
comes in two
easy-to-assemble
components.
1
Slide handle into base.
4
Make sure hose is wrapped.
Rotate the latch to lock
into place.
• Upper handle
• Portable spot
cleaner/Base
2
On the back, insert
4 screws in a slight
upward angle.
5
Rotate
to Lock
Store an attachment on the end of the hose.
Since attachments vary by model, see carton
for which attachments are included.
The only tool you will need to assemble
your cleaner is a Phillips screwdriver.
3
Attachments
may face forward
for best fit.
Wrap cord.
Crevice
Tool
www.BISSELL.com
5