Bissell PROHEAT 2X LIFT-OFF 30K7 Series User Manual page 8

Clean Carpet:
1
Plug into a properly grounded outlet.
Indicator light turns on when unit is
plugged in, power switch is pushed and
pod is seated correctly.
3
If light doesn't
turn on, reseat
pod.
4
Press recline pedal to release handle.
NOTE: The LIFT-OFF® Deep Cleaner may be equipped with a circuit breaker
that automatically shuts off the brush if a large or loose object catches in the
brush roll. If that occurs, unplug your machine, remove the foreign object, and
plug the unit back to reset circuit breaker.
ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated
strokes in the same area with an ordinary vacuum or deep cleaner may aggravate
this condition.
www.BISSELL.com
8
Upright Mode
Listen for
two clicks.
Recline
Pedal
2
After confirming formula & water
tank is filled properly, press the power
button, located on the cord wrap side.
5
Press the trigger to
apply solution.
Slowly make 2 wet
passes, one forward
and one back.
Power
Button
Release the trigger to
recover the dirty solution
by slowly making 2 dry
passes, one forward and
one back.