Bissell PROHEAT 2X LIFT-OFF 30K7 Series User Manual page 12

Maintenance:
1
To replace small belt, flip the base unit
to the side with the pod release pedal on
the bottom.
2
Remove the only screw holding pivot
arm, gently pull off arm to expose ends
of the brush rolls.
www.BISSELL.com
12
Replacing Small Belt
Small
Belt
Pivot Arm
Small
Belt
Roller
End
Cap
Screw 2
Pod
Release
Pedal
Using phillips-head screwdriver, remove
three screws from the end cap and set
to side.
3
Replace the small belt before reversing
steps to reassemble pivot arm and
end cap.
Screw 1
Screw 3
Small
Belt