Icom IC-M505 Instruction Manual page 40

6
DSC OPERATION
D Transmitting a position report call
Transmt a poston report call when you want to announce
your own poston to a specfic shp and to get an answer, etc.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Position Report,"
push [CHANNEL•ENTER].
Select Item
Position Input
Individual Call
Group Call
All Ships Call
Position Request
˘Position Report
e Rotate [CHANNEL] to select the desred pre-pro-
grammed ndvdual address or "Manual Input," push
[CHANNEL•ENTER].
• The ID code can be set n advance. (p. 17)
• When "Manual Input" s selected, set the 9-dgt MMSI
number for the ndvdual you wsh to call by rotatng [CHANNEL].
Select Address
Manual Input
John
˘Paul
George
Michael
<CLR Exit / ENT OK>
34
--DSC Menu--
--DSC Menu--
Regardless of a GPS recever (NMEA0183 ver. 2.0 or
3.01) connecton, the current poston/tme nformaton
appears n steps r and t. If the nformaton s not nec-
essary to be changed, push [CHANNEL•ENTER] or
[16•C] several tmes to skp the data nput steps.
r The poston nformaton appears. Set your poston (lat-
tude and longtude) data by rotatng [CHANNEL].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Rotate [CHANNEL] to edt N; North lattude or S; South lattude
when the cursor s on the 'N' or 'S' poston, and W; West longtude
or E; East longtude when the cursor s on the 'W' or 'E' poston.
• Push [CLR] for 1 sec. to clear the lattude/longtude data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
Input Position
Latitude
__ __.___N
Longitude
__ __.___W
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
t After settng the poston data, push [CHANNEL•ENTER]
to set the current UTC tme. Set the current UTC tme by
rotatng [CHANNEL], then push [CHANNEL•ENTER].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Push [CLR] for 1 sec. to clear the UTC tme data.
• Push [CLR] to cancel and return to the DSC menu.
Null
Null