Icom IC-M505 Instruction Manual page 31

Regardless of a GPS recever (NMEA0183 ver. 2.0 or
3.01) connecton, the current poston/tme nformaton
appears n steps r and t. If the nformaton s not nec-
essary to be changed, push [CHANNEL•ENTER] or
[16•C] several tmes to skp the data nput steps.
r The poston nformaton appears. Set your poston (lat-
tude and longtude) data by rotatng [CHANNEL].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Rotate [CHANNEL] to edt N; North lattude or S; South lattude
when the cursor s on the 'N' or 'S' poston, and W; West longtude
or E; East longtude when the cursor s on the 'W' or 'E' poston.
• Push [CLR] for 1 sec. to clear the lattude/longtude data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
Input Position
Latitude
__ __.___N
Longitude
__ __.___W
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
t After settng the poston data, push [CHANNEL•ENTER]
to set the current UTC tme. Set the current UTC tme by
rotatng [CHANNEL], then push [CHANNEL•ENTER].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Push [CLR] for 1 sec. to clear the UTC tme data.
• Push [CLR] to cancel and return to the DSC menu.
Null
Null
--DSC Menu--
Input UTC Time
__:__
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
y Push [DISTRESS] for 5 sec. to transmt the dstress call.
• Whle pushng [DISTRESS], the key backlghtng blnks.
u After transmttng the dstress call, the transcever wats
for an acknowledgment call on Channel 70.
• The dstress call s automatcally transmtted every 3.5 to 4.5 mn.
• After 2 sec., the transcever s set to Channel 16 automatcally.
Distress Call
TX Complete
Now Waiting for ACK
<CLR Cancel>
25W
TAG
After 2 sec.
Wait ACK
<CLR
Cancel>
6
DSC OPERATION
Null
INT
CALLING
6
25