Color; Quick Color Adj; Gamma - Mitsubishi DATA PROJECTOR User Manual

Color

• Do the following operation while displaying the image you want to adjust or set.
• Select the menu name "Color".
See "Menu Operation Method" on Page E-37 for information about performing menu operations. The item name display will
differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-
42.

Quick Color Adj.

Select the preset color mode.
Select the "Quick Color Adj." item name and select the setting contents with
the SELECT buttons.
Color ........... Select this to prioritize color.
Standard ..... Select this to prioritize brightness.
* When "Color" or "Standard" is selected, the "Gamma", "Color Temp." and "White" adjustment
items are displayed in gray and cannot be selected or adjusted.
Custom ....... "Gamma", "Color Temp." and "White" adjustment items can be selected
and adjusted
* The selected values for the different adjustment items are stored in the memory so the desired
color adjustments can be set.

Gamma

Gamma corrects the proportion of change of the dark portions from the
bright portions of the input signal.
Set this to reproduce natural color tone or to distinctly project a per-
sonal computer picture in a bright conference room.
Select the "Gamma" item name and select the setting contents with the SE-
LECT buttons.
Normal ....... Correction with standard settings
Natural ........ Corrects for natural color tones
Real ............ Corrects with emphasis on brightness
Note:
When "Color" or "Standard" is selected for "Quick Color Adj.", the "Gamma" adjust-
ment item is displayed in gray and cannot be selected or adjusted.
E-46