11
Position of the thread catcher
.07.04
Requirement
1. The bottom edge of thread catcher 1 must be at a distance of 0.1 mm from the
positioning finger of the bobbin case 3.
2. When the thread trimmer is in its resting position, the back edge of the thread catcher
should be approx. 2.5 – 3 mm behind the edge of the knife.
3
Fig. 11 - 47
Move or turn thread catcher 1 (screws 2, two screws) in accordance with the
requirements.
Thread catcher 1 must be parallel to the surface of the thread catcher holder 4.
1
1
4
Adjustment
3
2
11 - 51