Inserting The Needle On Model 574 - Pfaff 571 Instruction Manual

Setting up
9

Inserting the needle on model 574

.02
9 - 2
2
1
Fig. 9 - 02
The choice of needle depends on the model of the machine and the thread and
material used (see Chapter 3.02 Needles and threads).
Switch the machine off!
Danger of injury if the machine
is started accidentally!
Only use needles of system 134-35.
Raise the roller presser 1 and swing it
out.
2
Loosen screws 2 and insert the needles
so that the long groove of the left needle
is facing right, and that of the right
needle is facing left.
Tighten screws 2 and swing roller
presser 1 back into position.