Mitsubishi Electric 700 Series Programming Manual page 168

Functions
WXOR
(1) Performs the exclusive OR of the 16-bit data of device specified at
16-bit data of device specified at
specified at
D
Before
execution
After
execution
(2) Performs the exclusive OR of the 16-bit data of device specified at
16-bit data of device specified at
specified at
D
Before
execution
After
execution
(3) When operation is performed, the digits of bit device higher than the specified are
regarded as 0.
Execution Conditions
The execution conditions of the exclusive logical add instructions are as shown below.
Operation
command
WXOR
WXORP
S
.
S2
.
Executed every
scan.
Executed only once.
per bit, and stores the result into the device
16 bits
per bit, and stores the result into the device
16 bits
Executed every
scan.
Executed only once.
Application instructions
and the
D
S1 and the
3
163