EverFocus ECOR FHD 4F User Manual page 32

To set the DVR for Internet Connection through router:
The next step is to open ports within your router. Log into the router using a PC and

open the following ports.
Ports to open: 80

If your Internet service provider blocks port 80, you can change it to a different port

in the DVR's Network Menu Setup; open/forward that port instead.
If you are using a Linksys or D-Link router, see Appendix B for basic support on

setting up ports. For any other router, you will need to contact the manufacturer
for support.
To access the DVR from a computer simply open Internet Explorer and in the address

bar type:
http:// (the IP address given by your internet service provider)
Note: If you changed to a different port other than 80, you will need to include this
at the end of the IP address:
http:// (the IP address given by your internet service provider):port number
If you have a WAN Dynamic IP address and have opened the ports, go to 6.7.3 DDNS

Setup to configure the DDNS settings.
ECOR FHD 4F / 8F / 16F Full HD DVR
24