EverFocus ECOR FHD 4F User Manual page 19

ECOR FHD 8F / 16F:
You can optionally install two 3.5" HDDs inside the ECOR FHD 8F / 16F DVR for recording videos.
1. Follow the first three steps above to open the DVR housing.
2. Please install the HDD firstly on the HDD Bracket and then install the second one onto the
DVR.
2
3. Screw a HDD onto the HDD Bracket using the supplied four short screws.
4. Connect the internal SATA cable to the SATA port of the HDD, and connect the internal
power cable to the HDD to complete the first HDD installation (You need to connect these
cables to the second HDD before installing).
SATA Cable
1
Power Cable
11
ECOR FHD 4F / 8F / 16F Full HD DVR