Table of Contents
Advertisement
Fascia Installation
Step 1. Unpack and remove the fascia components check to see you have all the components as
listed on page 1.
Step 2. Identify the top and bottom panels, these are the longest of the four panels supplied. The
top panel has an additional return fold. The bottom panel has two holes for securing, see
image.
Step 3. Remove the protective PVC coating from all panels.
Step 4. On a flat, clean surface assemble the top, side and bottom fascia panels using the 8 pcs
M4 x 8 screws supplied.
Step 5. Fit the four frame mounting brackets to the cabinet frame using the 8 pcs M5 x 10 screws
supplied.
Step 6. Position the fascia assembly by hooking the top fascia panel over the top two mounting
brackets (1), then swing the assembly in at the bottom (2). The fascia assembly can then be
secured into position using 2 pcs M4 x 8 screws (3).
Rinnai Australia
FASCIA INSTALLATION
- 20 -
Rinnai Luminaire® Outdoor Gas Fire - Operation and Installation Manual
Advertisement
Table of Contents
