Align doors and attach frame brackets
Step 1. Align doors and tighten, some
adjustment may be necessary to
square the frame. Holding the door
with one hand and tightening the
screws with the other is a good
way to do this.
Step 2. Secure 4 frame brackets provided
with the Rinnai Luminaire Outdoor
Gas Fire using 2 pcs M5 x 10
screws supplied.
Fit doors to swing arms
Step 1. Attach doors to swing arms using
8 pcs M5 x 10 screws provided.
Step 2. Attach frame from the Rinnai
Luminaire Outdoor Gas Fire.
Removing the frame
Step 1. Remove the 2 pcs M4 x 8 underside screws from the bottom of the frame.
Step 2. Detach frame from the bottom, swing out and lift off the top of the upper frame bracket.
Step 3. Remove the 4 frame brackets.
Removing the burner assembly
The burner assembly weighs approximately 20 kg, if required seek additional assistance in lifting. You
may also want to remove some of the large quartz pieces to make it easier to carry.
Step 1. Disconnect gas and gas connection.
Step 2. Remove left and right granite plates from the burner.
Step 3. Remove the large 2 pcs M5 x 10 burner mounting screws on the left and right of the burner
assembly anchoring the burner assembly to the cabinet.
Step 4. Carefully remove the burner and set aside.
Rinnai Australia
FASCIA INSTALLATION
- 19 -
Rinnai Luminaire® Outdoor Gas Fire - Operation and Installation Manual