Sanyo PLC-WL2500A Service Manual page 16

Mechanical Disassembly
v Power, ballast boards and fans (FN906, FN907) removal
1. Remove 3 screws A(T3x8) to remove the fans (FN906, FN907) assy.
2. R emove 1 screw B(T3x8) to remove the lamp socket. Remove 3 screws C(T3x8) to re-
move the lamp cover bottom. Unhook the ballast cable from the cabinet bottom.
3. R emove 2 screws D(M4x6) and 3 screws E(T3x8). Disconnect the connectors "CN1" on
the ballast board and "K6C" on the power board. Remove the power box top upward off.
4. Remove 3 screws F(T3x8) to remove the power board.
C C
B C
Lamp socket
Lamp cover
bottom
Fig.4
A
A
A
FN906
FN907
-16-
d d
e
e
e
Power box top
F
F
F
Power board
Isolation sheet
Isolation sheet
Ballast board