Sanyo PLC-WL2500A Service Manual page 14

Mechanical Disassembly
x AV panel and cabinet top removal
1. Remove 5 screws A(M3x8) to remove the AV panel.
2. R emove 3 screws B(T3x8), 1 screw C(T3x8), 2 screws D(M3x8) and 1 screw E(T3x8)
and 1 screw F(T3x8) to remove the cabinet top assy.
3. Loosen 1 screw G and remove the lamp cover in the arrow direction.
4. Remove 2 screws H(T3x8) to remove the shield plate.
Lamp cover
G
d
e
Cabinet top
d
F
C
(Located on the center of
the cabinet bottom.)
-14-
Shield plate
H
H
B
B
B
AV panel
A
A
A
A
A
Fig.2