Figure 6-17: Wireless Repeater - Linksys WAP54GP User Manual

2.4ghz wireless-g access point with power over ethernet

Hide thumbs Also See for WAP54GP:

Table of Contents

Wireless-G Access Point with Power Over Ethernet

Wireless Repeater

When set to Wireless Repeater mode, the Access Point receives the signal from the remote Access Point and

retransmits its signal. (This feature only works with the Linksys Wireless-G Exterior Access Point (model number:

WAP54GPE) and Wireless-G Interior Access Point (model number: WAP54GP).

To configure a Wireless Repeater environment, click Wireless Repeater and enter the MAC addresses of the

remote access points in the MAC fields. If you do not know an access point's MAC address, click the Site Survey

button. Select the access points you want to use and click the Apply button. Then click the Close button to return

to the AP Mode screen. If you do not see the access point you want, click the Refresh button to run another site

survey.

Figure 6-17: Wireless Repeater

Chapter 6: Configuring the Wireless-G Access Point with Power Over Ethernet

The AP Mode Tab

Table of Contents