Linksys WAP54GP User Manual page 30

Wireless-G Access Point with Power Over Ethernet
Fragmentation Threshold. This specifies the maximum size a data packet can be before splitting and creating
a new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which
creates more packets for each transmission. If you experience high packet error rates, you can decrease this
value, but it will likely decrease overall network performance. Only minor modifications of this value are
recommended.
Power Output. You can adjust the output power of the Access Point to get the appropriate coverage for your
wireless network. Select the level you need for your environment. If you are not sure of which setting to choose,
then keep the default setting, 100%.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Chapter 6: Configuring the Wireless-G Access Point with Power Over Ethernet 24
The Wireless - Advanced Wireless Settings Tab