48
Optional Equipment
Power Heat Duct Installation
The optional power heat (98500769) duct may be used with this fireplace. Attach one or two heat ducts
to the connections on top of the fireplace. Follow the directions included with the power heat duct for
installation. The wiring may be routed through a snap disc on the fireplace (similar to the 864 HH).
NOTE: This fireplace has a snap disk pre-installed for the power heat duct. Attach the wiring included
with the power heat duct
The location of the power heat duct cover on the rear of the fireplace is shown below.
1. Remove the 4 screws on the power heat duct cover and remove the cover.
© Travis Industries
(for qualified installers only)
4140922
100-01410